cancel
Showing results for 
Search instead for 
Did you mean: 

Radius Setup on 2008 Server with WC 2110, Radius client IP = AP IP or Controller IP ?

Radius Setup on 2008 Server with WC 2110, Radius client IP = AP IP or Controller IP ?

littlefurball
New Contributor
Hi guys

I'm trying to setup radius in Server 2008 R2 which is also the domain controller / active directory server. In NPS, it asks for the radius client IP address, what should I put for the IP address?? AP IP or WC 2110 IP?

74a599c233414420a67b87a409652910_RackMultipart20151202-10610-gy3fyc-radius2_inline.jpg



And also on the Controller, what ip to put for radius server? Domain controller ip address?

74a599c233414420a67b87a409652910_RackMultipart20151202-6504-84sij6-radius_inline.jpg


Thanks

2 REPLIES 2

littlefurball
New Contributor
I see thanks a lot Gareth

Gareth_Mitchell
Extreme Employee
Hi Roger

In this example, from the domain controllers point of view, the wireless controller is the radius client, not the AP.

You're correct, on the controller the IP is the radius server, in your case this is the domain controller.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-do-configure-RADIUS-server-for-VNS-Glo...

-Gareth

GTM-P2G8KFN