real capture - "standalone capture AP"

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi,

as we know we'd use a controller AP in a pseudo standalone mode if we enable "Maintain client sessions in event of poll failure" & "Restart service in the absence of controller" for a PSK WLAN.

I was wondering whether we'd also enable real capture without a controller.
That would give me the ability to go onsite with my "capture standalone AP3825i" and collect an air trace without the need to connect/affect the customers infrastructure.

Or what hardware does the GTAC use to collect a 802.11ac trace without using real capture on the AP interface.

-Ron
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,164 Points 50k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Tony

Tony

  • 550 Points 500 badge 2x thumb
Hi Ron, 

you can start Realcapture from the AP CLI.


# ccapture
Usage: ccapture stop | start <seconds>
#