Reboot the node in the Extreme 460/460-G2 stack

  • 0
  • 1
  • Problem
  • Updated 3 months ago
  • In Progress
Photo of Yurij

Yurij

  • 140 Points 100 badge 2x thumb

Posted 3 months ago

  • 0
  • 1
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,354 Points 10k badge 2x thumb
Hello Yurij,

Can you elaborate on this subject?
Photo of Yurij

Yurij

  • 140 Points 100 badge 2x thumb
There are 4 switches in the stack

Slot-1 X460G2-48x-10G4

Slot-3 X460-48x

Slot-6 X460G2-48t-10G4

Slot-7 X460-48p

Image Selected:   secondary                    secondary
Image Booted:     secondary                    secondary
Primary ver: 16.2.4.5 16.2.4.5
Secondary ver: 15.6.3.1 15.6.3.1 
                  patch1-5 patch1-5

We have recently started to reboot the node


02/22/2018 21:29:07.84 <Warn:DM.Warning> Slot-6: BACKUP NODE (Slot-1) DOWN
02/22/2018 21:29:07.78 <Info:HAL.Port.Info> Slot-6: Stacking port 1:2 link down.
02/22/2018 21:29:07.77 <Warn:DM.Warning> Slot-6: BACKUP is NOT in SYNC
02/22/2018 21:29:07.74 <Info:HAL.Card.Info> Slot-6: Slot-1 down, resetting all TCP connections to it
02/22/2018 21:29:07.74 <Info:HAL.Card.Info> Slot-6: Module in Slot-1 is removed
02/22/2018 21:29:05.93 <Warn:DM.Warning> Slot-3: BACKUP NODE (Slot-1) DOWN
02/22/2018 21:29:05.89 <Warn:DM.Warning> Slot-7: BACKUP NODE (Slot-1) DOWN
  
02/22/2018 22:03:46.68 <Info:HAL.Port.Info> Slot-6: Stacking port 6:2 link down.
02/22/2018 22:03:46.67 <Info:HAL.Port.Info> Slot-6: Stacking port 3:1 link down.
02/22/2018 22:03:46.67 <Info:vlan.msgs.portLinkStateDown> Slot-6: Port 3:1 link down
02/22/2018 22:03:46.64 <Info:HAL.Card.Info> Slot-6: Slot-3 down, resetting all TCP connections to it 

02/22/2018 22:03:46.64 <Info:HAL.Card.Info> Slot-6: Module in Slot-3 is removed


we changed the stack modules, cables


 


updated to the current firmware 16.2.4.5, but then rolled back to 15.6.3.1patch1-5


 


reloading different nodes, for the day there were 2-3 reboots,


the relationship has not yet been found (


 


can anyone come across?

 
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,354 Points 10k badge 2x thumb
Why did you roll back to 15.6? Can you send a "show port stack rx" output?
Photo of Yurij

Yurij

  • 140 Points 100 badge 2x thumb
We rolled back, because reboots began to appear more often

# show ports stack-ports rxerrors
Port Rx Error Monitor                                  Thu Feb 22 23:06:21 2018
Port      Link     Rx      Rx      Rx        Rx      Rx         Rx         Rx
          State    Crc    Over    Under     Frag    Jabber      Align      Lost
================================================================================
1:1       R        0       0        0        0        0          0          0
1:2       A        0       0        0        0        0          0          0
2:1      NP        0       0        0        0        0          0          0
2:2      NP        0       0        0        0        0          0          0
3:1       A        0       0        0        0        0          0          0
3:2       R        0       0        0        0        0          0          0
6:1       A        0       0        0        0        0          0          0
6:2       A       13       0        0        0        0          0          0
7:1       A        0       0        0        0        0          0          0
7:2       A        0       0        0        0        0          0          0
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,354 Points 10k badge 2x thumb
Did you used to have a 7 node stack then removed slots 2, 4 and 5? How are the stacking cable connected? In a ring?
Photo of Yurij

Yurij

  • 140 Points 100 badge 2x thumb
only slot 2 removed

4,5 never used

stacking cable connected - ring