cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Redundancy between two NAC instances

Redundancy between two NAC instances

Ilya_Semenov
Contributor
Hello, everybody,

how could I set redundancy between two NAC instances?

I have set up MAC and 802.1x auth on my switches, but it works until NAC is alive, so it's kind of time bomb: when NAC is offline nothing works. I want to setup redundancy - is it possible?

Many thanks in advance

Ilya
13 REPLIES 13

Ilya_Semenov
Contributor
I've applied the configuration on Friday, January, 12th. On Tuesday, January, 16th there is no anyting related to Secondary NAC on the switch. So, it is no so easy.... Something doesn't work.

Bharathiraja__S
Extreme Employee
Hi,

Agreed ,
once you enforced from NAC switch will be conigured for both primary and secondary server.

Thanks,
Suresh.B

Zdeněk_Pala
Extreme Employee
if you use up-to-art firmware and you specified cli credentials then the only thing you need to do is: Add second engine to the group. Add/modify the switch in the XMC (netsight) to referr to both engines, define vr, realm, accountig enable... Enforce the configuration. The engine will configure your switch throug the CLI properly. Just wait 2-5minutes. You do not need to add those two lines manually, but you can ļ™‚ Regards. Z.
Regards Zdeněk Pala

Thanks, Zdenek! I've got it(

80% of switches are x430 family which couldn't run EXOS's 22 code(

Will my configuration with manual addition of secondary NAC on switches work?
GTM-P2G8KFN