Regular LAG in a MLAG config

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
Create Date: Jul 17 2013 10:52AM

There are 2 core switches and two edge switches.

There is an ISC Link between the core switches.

The Edge Switch should be connected via "Regular LAG" to both cores through port 1 and port 2.

CONFIGURING MLAG "Edge on two Cores"

Does it mean we should configure Port Sharing an the Edge line this?
enable sharing 1 grouping 1,2
There is only ONE Port "1" on the Edge later.
There is no Port 2 on the Edge later.

CONFIGURING MLAG "Core on two Edges"

Because of the shared Port 1(1+2) there is no chance to configure it.



(from roman@krakovic.de)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 1 2013 10:18AM

That's correct, after port grouping You use only group port 1.

(from karpiu)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Sep 7 2013 2:43AM

Two-tier MLAG Implementation Guide...
https://www.dropbox.com/s/pb4qsdzis05...

(from Daniel_Flouret)

This conversation is no longer open for comments or replies.