Remote Port Required

  • 0
  • 1
  • Problem
  • Updated 10 months ago
  • Solved
I'm reconfiguring a wireless network and have run into an issue.  Currently the network is set up as a /16 subnet and I'm reducing it to a /22.  I changed the gateway device's mask to /22, but when I try to change the controller's mask it tells me that "The Remote Port is Required".  What am I missing here?

Photo of Terren Crider

Terren Crider

  • 1,564 Points 1k badge 2x thumb

Posted 10 months ago

  • 0
  • 1
Photo of Terren Crider

Terren Crider

  • 1,564 Points 1k badge 2x thumb
Well... It appears that the problem was the Synchronize checkbox.  I had to uncheck it since this topology does not exist on my other controller.
Photo of Steve Ballantyne

Steve Ballantyne

  • 5,806 Points 5k badge 2x thumb
That's funny. I had this same issue. But when I saw you post this error message I was racking my brain about what I did to get that message.