replacing the whole stack (5 x summit x440 24&48P) with new same model node with higher sw images. i need the procedure on how to do it!

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
due to allegedly batch defect, we will replace the previously deployed switch with new coming from new batch. please share the step on how to replace the whole stack with minimum downtime.
Photo of DASTAN

DASTAN

  • 192 Points 100 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Hello DASTAN  in order to move the configuration over to the new stack just use the TFTP command to copy the .cfg file you want to a server.  Then tftp that file to the new stack.  Use the command use config <config file name> to tell the switch to use that file.  Then reboot.

Using TFTp saves the config as a xml file.

Let me know if that helps

P
Photo of PARTHIBAN CHINNAYA

PARTHIBAN CHINNAYA, Alum

  • 4,382 Points 4k badge 2x thumb
1. You have to upgrade all the switches in stack to the same software version
Download image exosversion VR vr-def
2. Make sure all are in same partition
3. Run easy setup
4. Upload the backup config