Ridgeline Unused Ports

  • 0
  • 2
  • Problem
  • Updated 5 years ago
  • Acknowledged
Discovered a problem whereby the unused port report for Ridgeline does not work.

In order to get any output, the inactive period must be set to be either on or above 16153 days and 10 hours to display.

Nothing mentioned in release notes for service pack to suggest issue with reports function?
Photo of Ian Broadway

Ian Broadway

  • 1,854 Points 1k badge 2x thumb

Posted 5 years ago

  • 0
  • 2
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Official Response
Hello Ian

I did check with TAC and it appears this is an issue.  At this point we do not have any time frame on a fix.  As you may be aware we are releasing NetSight 6.0 which will give us the initial support for XOS products.  The plan is to continue rapid development on NetSight to provide feature parody with Ridgeline. 

Any customer who uses Ridgeline and has a service contract will be able to migrate to NetSight for continued support.

I hope that helps.  If I have a chance I will test reporting in NS 6.0 and see if this report is in there.