cancel
Showing results for 
Search instead for 
Did you mean: 

Roaming between sites

Roaming between sites

JohanHendrikx
Contributor II
If I am correct, you can assign 32 Ap's to a site. So if there are more then 32 AP's, you have to create a new site.

In the logging of the EWC I see de-registration of clients and the additonal detail is that the cause is roaming between two different sites.

Is this roaming or a disconnect at AP1 and an connect at the AP2 ?

Johan Hendrik System Architect Audax
6 REPLIES 6

Ronald_Dvorak
Honored Contributor
I'd say roaming.

Why do you use sites ?

-Ron

thanks
Johan Hendrik System Architect Audax

OK, so you don't need the sites function.

In > VNS > WLAN Services >
Building#1 SSIDs - just select the APs in Building#1
Building#2 SSIDs - just select the APs in Building#2

There is no function to make group-templates but in my opinion that isn't needed as you only set it once and never touch it again.

I don't know how your network looks like so you might want to disable " Inter-WLAN Service Roaming" in the advanced option of every WLAN service.

Here a old post that explains it a little bit...
https://community.extremenetworks.com/extreme/topics/wireless_location_issues

-Ron

Oke, my situation is: controller is present on the central site.Central site have two buildings. One office and one logistic. Configuration for Office is different then the configuration of the logistic building ( different wlan's). Logstic building have more then 32 AP's.

How can I link Wlan's to AP's ?

Johan Hendrik System Architect Audax
GTM-P2G8KFN