Roaming issue.

  • 0
  • 1
  • Problem
  • Updated 6 months ago
  • Solved
Hello Friends.

Could you help mi with small issue. I have a RFS400 with 8 AP-6521.And i have some problem with that.

Peaople from werehouse work on terminal(gun) with remote destop and sometie when they walk around werehosu wen switching beetwen AP they lost connection to remote destop for 30 sec some time it is happen some times not. ON RFS and AP is WING 5.8.6.0-11R

I have no Idea what is going on. Could you help me?

.
Photo of Kamil Mazur

Kamil Mazur

  • 132 Points 100 badge 2x thumb

Posted 6 months ago

  • 0
  • 1
Photo of Timo

Timo

  • 3,210 Points 3k badge 2x thumb
Hi,
do you check the event-history for messages? show event-history via CLI.

What typ of scanner do you use? Motorola/Symbol/Zebra, check for fusion logs.

What typ of encryption/authentication do you use?
Photo of JESUS REYES DIAZ

JESUS REYES DIAZ

  • 222 Points 100 badge 2x thumb
1.- can you check ROSSI on móvil device? Problema with converge?
2.- AP6521 Is a level entry device for a warehouse, then you should take a site survey .
3.- AP with antennas External ?
Photo of Ignace Vyncke

Ignace Vyncke

  • 180 Points 100 badge 2x thumb
hi, have you looked at your channel's on different AP's, is smart-RF enabled or not ?
Photo of Bin

Bin, Employee

  • 5,338 Points 5k badge 2x thumb
Hi, Kamil

Add the following article for your reference.

why do my wireless clients not roam properly?
https://gtacknowledge.extremenetworks.com/articles/Q_A/why-do-my-wireless-clients-not-roam-properly

Best regards,
Bin
Photo of Kamil Mazur

Kamil Mazur

  • 132 Points 100 badge 2x thumb
Hello,
Today on my werehous was for couple hours ok, then again 30-60sec dealy on rdp conecction.
I forgot to mention thaht when it was configured on virtualControler there was no problems

Hello Timo,
do you check the event-history for messages? show event-history via CLI.
Yep but it is nothing i thing. I go again with that and send logs tomorow. Maybey you will see with that.



What typ of scanner do you use? Motorola/Symbol/Zebra, check for fusion logs.
We use Motorola MC9100, i checked fusion logs and everything is ok enitaime connected to MAC (ap) and coneccted to network so i think is ok.

What typ of encryption/authentication do you use?
wlan xxx
 ssid xxx
 vlan 1
 bridging-mode tunnel
 encryption-type ccmp
 authentication-type none
 wpa-wpa2 psk 0 password
 wpa-wpa2 exclude-wpa2-tkip


Hello, Jesus
1.- can you check ROSSI on móvil device? Problema with converge? 
2.- AP6521 Is a level entry device for a warehouse, then you should take a site survey .
This was configured firstyl as VC at commpay external and it was working perfect.
What is ROSSI?

3.- AP with antennas External ?
External

Hello Ignace,
hi, have you looked at your channel's on different AP's, is smart-RF enabled or not ?
Yeah I use 1,6,11 channels with smart-rf


Hello Bin,
I need to go with check this tomorrow.

It is weard thing like today work perfectly couple haours and then some problems.

I am still seachring the problem.


Thanks friends.
Photo of Richard Muehlberger

Richard Muehlberger

  • 170 Points 100 badge 2x thumb
hi kamil,

is it only rdp?
what about a permanent ping, does it fail too?

30 seconds sounds like spanning tree

so
- ensure that there is no loop over the rfs4k
- check the log of the backbone switch


nr
richard
Photo of Kamil Mazur

Kamil Mazur

  • 132 Points 100 badge 2x thumb
Hello guys.
Thanks Richard.
I found the reason, it was 2 switch Connect double (on lan and fibre channel) on AP side. I correct this and problem dissapper.

Thanks for your help.