cancel
Showing results for 
Search instead for 
Did you mean: 

Routing question with VDX. I don't want this route.

Routing question with VDX. I don't want this route.

Al_Mat
New Contributor II
Hello!
I have a question about my Vdx-6740 fabric.
I have a laptop who is pluged into a router (R1).
R1 is pluged in VDX54.
VDX54 is pluged in VDX53 (Fabric ISL Trunk)
And the institution (ECO) is pluged in VDX53.

On VDX54, I have:
Vlan 912: 10.1.54.11
Vlan 195: 172.16.32.2
Vlan 198: 172.16.0.2

On VDX53, I have:
Vlan 154: 10.54.8.121
Vlan 195: 172.16.32.3
Vlan 198: 172.16.0.3
Vlan 921: 10.1.18.10

If I have a look on routing table on VDX54:

85ebcb43e483449c9696b2d449f1c6a1_RackMultipart20180309-100611-1n848zt-Captureroute_inline.jpg



I do not want packets to go through roads 172.
How do I do that?

In a fabric, do I have to set the virtual interface for each vlan on each VDX or it's works like a stack?

I uploaded a screen shot of the routing table and a little plan for connection.

Thanks!

BYe!

85ebcb43e483449c9696b2d449f1c6a1_RackMultipart20180309-83684-13uvqdv-Capture_fabric_inline.jpg



1 REPLY 1

Yulia_Abitbul
Extreme Employee
L3 configuration should be done on each VDX separately
GTM-P2G8KFN