cancel
Showing results for 
Search instead for 
Did you mean: 

run diagnostics extended - not running

run diagnostics extended - not running

Stanley_Riley_J
New Contributor II
Summit x450e-48P - run diagnostics extended command not doing anything but rebooting switch and returning me back to the switch login prompt. When I run sh diagnostics, it shows that the diagnostics passed but back in November of 2012.

Any ideas?

Thanks,
Stan
12 REPLIES 12

Tripathy__Priya
Extreme Employee
Does it show the diag has failed the test? or something similar to that at any point?

Jimmy_Sands
New Contributor
What happens when after it reboots you run

show diag

Tripathy__Priya
Extreme Employee
Continuing with what my colleague Praveen has to say, please attach the test run snippet to confirm further. In most likely hood it seems to be RMA though.

Jacob__Praveen
Extreme Employee
Stan,

You needn't run each individual test in the diagnostics at any point of time - the original command stays - run diag. Looking at what we are seeing here with your switch, I would most definitely think that this would need an RMA. However, please do paste the snippet of your test run here.

Thanks,
Praveen
GTM-P2G8KFN