S-Series: show port transceiver

  • 0
  • 1
  • Problem
  • Updated 4 years ago
S-Series firmware 08.31.01.0006 has introduced the new "show port transceiver" command set which is great, however it does not appear to work for transceivers in tg.x.1-4 and tg.x.101-104 in a SK5208-0808-F6 with 2x SOK2208-0204 in a S6 chassis.  tg.x.5-8 and tg.x.201-204 work as expected.

For example:

S6(su)-> show port transceiver tg.4.* basic-only

Transceiver Data (operational transceivers only)
--------------------------------------------------

Port        Vendor           Vendor
            Name             Serial Number
----------- ---------------- ----------------
tg.4.5      FINISAR CORP.    ARD04EF
tg.4.6      FINISAR CORP.    ARE0V7Z
tg.4.7      FINISAR CORP.    ARE20BT
tg.4.8      FINISAR CORP.    ARE0T1V
tg.4.201    FINISAR CORP.    ARE0V7K
tg.4.202    FINISAR CORP.    ARE0SKH
tg.4.203    FINISAR CORP.    ARE0QXN
tg.4.204    FINISAR CORP.    ARE0V08

versus

S6(su)-> show port status tg.4.*

Port         Alias            Oper     Admin   Speed  Duplex  Type
             (truncated)      Status   Status  (bps)
------------ ---------------- -------- ------- ------ ------- ------------------
tg.4.1                        down     up       10.0G full    10g-sr       lc
tg.4.2                        down     up       10.0G full    10g-sr       lc
tg.4.3                        down     up       10.0G full    10g-sr       lc
tg.4.4                        down     up       10.0G full    10g-sr       lc
tg.4.5                        down     up       10.0G full    10g-sr       lc
tg.4.6                        down     up       10.0G full    10g-sr       lc
tg.4.7                        down     up       10.0G full    10g-sr       lc
tg.4.8                        down     up       10.0G full    10g-sr       lc
tg.4.101                      down     up       10.0G full    10g-sr       lc
tg.4.102                      down     up       10.0G full    10g-sr       lc
tg.4.103                      down     up       10.0G full    10g-sr       lc
tg.4.104                      down     up       10.0G full    10g-sr       lc
tg.4.201                      down     up       10.0G full    10g-sr       lc
tg.4.202                      down     up       10.0G full    10g-sr       lc
tg.4.203                      down     up       10.0G full    10g-sr       lc
tg.4.204                      down     up       10.0G full    10g-sr       lc
16 of 16 ports displayed, 0 port(s) with oper status 'up' or 'dormant'.

---

It does work as expected on a SK1008-0816:

S6(su)-> show port transceiver tg.3.* basic-only

Transceiver Data (operational transceivers only)
--------------------------------------------------

Port        Vendor           Vendor
            Name             Serial Number
----------- ---------------- ----------------
tg.3.1      FINISAR CORP.    ARE0T35
tg.3.2      FINISAR CORP.    ARE20B7
tg.3.3      FINISAR CORP.    ARE0QCN
tg.3.4      FINISAR CORP.    ARE0V7G
tg.3.5      FINISAR CORP.    ARD0BDZ
tg.3.6      FINISAR CORP.    ARE0SKL
tg.3.7      FINISAR CORP.    ARE0J2Z
tg.3.8      FINISAR CORP.    ARE0QBJ
tg.3.9      FINISAR CORP.    ARE20BZ
tg.3.10     FINISAR CORP.    ARE0QBZ
tg.3.11     FINISAR CORP.    ARD2RNH
tg.3.12     FINISAR CORP.    ARE0SC0
tg.3.13     FINISAR CORP.    ARE0V84
tg.3.14     FINISAR CORP.    ARE2082
tg.3.15     FINISAR CORP.    ARE0V7R
tg.3.16     FINISAR CORP.    ARD04EA
Photo of Patrick M

Patrick M

  • 638 Points 500 badge 2x thumb
  • puzzled

Posted 4 years ago

  • 0
  • 1
Photo of Gilligan, Paul

Gilligan, Paul, Alum

  • 80 Points 75 badge 2x thumb
This issue will be fixed in a future maintenance release.
Photo of Patrick M

Patrick M

  • 638 Points 500 badge 2x thumb
Thanks Paul.