S-Series Halts with "SPI4 error FAP21V_SPI_B_SOURCE_FRM_ERROR" in Log

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 14133 

Products
S-Series 

Symptoms
Module generates a "SPI4 error FAP21V_SPI_B_SOURCE_FRM_ERROR" message in the Fault Log ('show support'), then initiates a halt. 

For example:
==============================================================================
Message 14/129 Shutdown 07.21.01.0015 08/06/2011 13:04:35

Initiated - Halt
Shutdown process is starting.

==============================================================================
Message 15/129 Syslog Message 07.21.01.0015 08/06/2011 13:04:35
<3>System[1]This device has encountered a hardware failure. NIM 0 has p
owered down. Please contact Support for a possible repair/replacement.

==============================================================================
Message 16/129 Syslog Message 07.21.01.0015 08/06/2011 13:04:35
<3>Dune[1.dTcmTask]FAP 0, slot 1 detects a SPI4 error FAP21V_SPI_B_SOURC
E_FRM_ERROR(1) (reg=0x0000000a)
Solution/Workaround
Please contact the GTAC for assistance. 

Workaround: To restart a halted module, deinsert/reinsert it within its slot.
Photo of FAQ User

FAQ User, Official Rep

  • 13,620 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.