S-Series Module Decoder

  • 0
  • 3
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 12341 


S130 Class
SG4101-0248, ST4106-0248
S140 Class
SG2201-0848, SK2008-0832, SK2009-0824, ST2206-0848 
S150 Class
SG1201-0848, SK1008-0816, ST1206-0848
SG1201-0848-F6, SK1208-0808-F6, ST1206-0848-F6
SSA-G1018-0652, SSA-T1068-0652, SSA-T1068-0652A 
S155 Class
SG5201-0848-F6, SK5208-0808-F6, ST5206-0848-F6 
S180 Class
SK8008-1224, SK8009-1224, SL8013-1206
SK8008-1224-F8, SK8009-1224-F8, SL8013-1206-F8
SG8201-0848-F8, ST8206-0848-F8, SK8208-0808-F8
SSA-G8018-0652, SSA-T8028-0652 
Series 1 NEM
SOG1201-0112, SOK1208-0102, SOK1208-0104, SOK1208-0204, SOT1206-0112 
Series 2 NEM
SOG2201-0112, SOK2208-0102, SOK2208-0104, SOK2208-0204, SOT2206-0112, SOGK2218-0212, SOTK2268-0212, SOV3208-0202 
Expansion Module

This article will help "spell out" the method by which S-Series module (not a chassis or power supply) part numbers are derived, considering each group of characters in turn from left to right. 


First group - Device Type where this part is used 

    S     =S-Series
    SO  =S-Series Optional NEM or Expansion Module
    SSA=S-Series Standalone
Second group - Interface Type 

    G=1G SFP or SFP+
    T=Triple Speed (10/100/1000) Ethernet
    V=Virtual Switch Bonding (VSB)
Third group - Dependent upon Device Type 

    For Device Type "S" or "SSA" - Class of Module
      4=Access                           S130 Class
      2=Distribution/Core    S140 Class
      1=Distribution/Core    S150 Class
      5=Distribution/Core    S155 Class
      8=Distribution/Core    S180 Class
      Please refer to the Enterasys S-Series datasheet for differences between these module classes.
    For Device Type "SO" - Series of NEM or Expansion Module
      1=Series 1 NEM
      2=Series 2 NEM
      3=NEM or Expansion Module for S140/S180 only
Fourth group - Dependent upon Device Type 

    For Device Type "S" or "SSA" - Number of Option Slots
      0=No option slots
      1=One option slot
      2=Two option slots
    For Device Type "SO" - Module Type
      0=Expansion module
      2=Standard NEM
Fifth group - Port Type 

    06=10/100/1000Mb RJ45 PoE (802.3at)
    09=10Gb and VSB
    13=40Gb and VSB
    18=SFP/10Gb SFP+
    28=10/100/1000Mb RJ45 and 10GB SFP+
    68=10/100/1000Mb RJ45 PoE (802.3at) and 10GB SFP+
Sixth group - I/O throughput capacity including option modules 

Seventh group - Number of fixed front panel ports 

Eighth group - for Fabric modules, the Fabric capacity 

    F6=1280Gb, load sharing
    F8=2560Gb, load sharing
Putting it together 

Here are some examples of applying these guidelines to a given part number:

    S S-Series
    G 1G SFP or SFP+
    1 Distribution/Core
    2 Two option slots
    01 SFP
    08 80Gb I/O Capacity
    48 48 fixed ports
    F6 1280Gb fabric capacity


    S S-Series
    K 10Gb
    1 Distribution/Core
    0 No option slots
    08 SFP+
    08 80Gb I/O capacity
    16 16 fixed ports


    SO S-Series optional NEM
    G 1G SFP or SFP+
    1 Series 1
    2 Standard NEM
    01 SFP
    01 10Gb I/O capacity
    12 12 fixed ports


    SSA S-Series Standalone
    T Triple Speed (10/100/1000) Ethernet
    1 Distribution/Core
    0 No option slots
    68 RJ45 PoE (802.3at) / 10GB SFP+ combo
    06 60Gb I/O capacity
    52 52 fixed ports
    Photo of FAQ User

    FAQ User, Official Rep

    • 13,590 Points 10k badge 2x thumb

    Posted 5 years ago

    • 0
    • 3

    There are no replies.

    This conversation is no longer open for comments or replies.