Secure tunnel behind NAT

  • 0
  • 1
  • Question
  • Updated 4 years ago
About the secure tunnel option, when the controller is deployed behind NAT this is not supported at this moment.
known issues:

o Availability pair, if two Controller behind NAT can’t be identified
o Image upgrade fails if Controller behind NAT

When do we support secure tunnel for controllers behind a NAT device?


Photo of Niels Boesten

Niels Boesten

  • 120 Points 100 badge 2x thumb

Posted 5 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,710 Points 20k badge 2x thumb
Updated: If the controller is behind a NAT'd interface the access point will only learn the private side address during the registration process not the public address. At this time it's not a supported configuration.