SecureStack f/w x.01.02.0007 with OSPF "failure in _checkTimers for thread" Error

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 10277 

Products
SecureStack C3, firmware 1.00.80 through 1.01.02.0007
SecureStack C2, firmware 5.00.59 through 5.01.02.0007 

Changes
Routing is enabled and OSPF has been configured, with VRRP. 

Symptoms
Error messages similar to the following appear in the current.log (5487) and may also be found in the syslog:
<162>Mar 30 15:05:23 10.20.4.1-1 SIM[202864024]: timer.c(995) 701 %%
XX_Call() failure in _checkTimers for thread 0xc18449c

A similar message is described in 11984

Solution
For the C3, upgrade to firmware 1.02.01.0004 or higher.
For the C2, upgrade to firmware 5.02.01.0006 or higher. 

Release notes state, in the 'Firmware Changes and Enhancements' section:
10194   Corrected a potential VRRP issue resulting in a CLI lock up while the following error message was displayed: SIM[213497528]: timer.c(995) 5048 %XX_Call() failure in _checkTimers for thread 0xcba85c0.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.