Security Profile

  • 0
  • 1
  • Question
  • Updated 4 years ago
Create Date: Apr 26 2013 1:52PM

I'm trying to get a security profile to run through netlogin once an IP Phone has been plugged in.  Currently the authentication works great through local netlogin mac authentication and and the vlan (78) gets automatically created on the port and on the uplinks.  However I would like to run some commands on the port once the authentication has happened. 

I've added the profile name to the local-user account as below:

create netlogin local-user 001D09000000 001d09000000 vlan-vsa 78 security-profile phoneProfile

I've then gone in and created the following profile:

create upm profile phoneProfile

create log message Starting_UPM_Phone_PROFILE
create log message PHONE_$EVENT.USER_PORT

For right now I just want it to send a message to the log as a proof of concept.  The problem is that it's not running the profile and it shows no errors in the log.

Any ideas?

Thanks in Advance!

-b

(from bw447)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.