Serious problem for snmp and ipv6

  • 0
  • 1
  • Question
  • Updated 5 years ago
Create Date: Sep 7 2012 5:08AM

Today i use summit x250 and 450 series switch and test get snmp infomation through IPv6,found if firmware was 12.x.x.x it w you will getill ok but when use version 15.x.x.x that switch will be reboot,so if you use 15.x.x.x version firmware don't through IPv6 get snmp information...................
from log you will get
09/07/2012 16:55:11.97 <Erro:EPM.crash_rate> Process snmpMaster exceeded pre-configured or default crash rate

 



(from Hsu_LiPing)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 5 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Sep 7 2012 6:50AM

HelpmeCan you please open a case with TAC so they can verify this and see about a resolution?ThanksP

(from Paul_Russo)

This conversation is no longer open for comments or replies.