cancel
Showing results for 
Search instead for 
Did you mean: 

Set Wireless Controller-Role with Policy-Manager

Set Wireless Controller-Role with Policy-Manager

Eisi1
New Contributor III
I want to set a Role on a Wireless Controller (C4110-2, 09.21.07.0007) with Policy-Manager (6.3.0.182). I was able to do it, but the role was created with "Bridge at AC" and I need "Bridge at AP". How can I change this?

9 REPLIES 9

Eisi1
New Contributor III
Hello,

I found a workaround with only one configuration on EWC:

-create VLAN in Policy-Manager with option "Always write VLAN to device(s)"

-Enforce

-change Topology with Wireless Controller-GUI to B@AP

-create Role in Policy-Manager

-Enforce

Thanks for all hints

Ronald_Dvorak
Honored Contributor
You are not able to create/add a new topology (=VLAN) in Policy Manager.

You need to create the new topology in the WLAN Controller GUI.

After you've done that you'd configure the new role with the topology/VLAN that you've created.

Ronald_Dvorak
Honored Contributor
You'd choose the right topology in PM - here a screenshot of my setup....

a48e2106ec5b4e0a95ec31047bdfe8ac_RackMultipart20161024-12542-46n22c-PM_topology_inline.png


Eisi1
New Contributor III
Ronald,

but my role needs an other vlan. I dont know how to set it?

GTM-P2G8KFN