cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

setting a captive portal on VX9000 managening remote AP

setting a captive portal on VX9000 managening remote AP

Hakim_HAMOUCHE
New Contributor II
Hi,
I have VX9000 managing multiple remote AP on diferent site and I want to set up a captive portal with basic onboard radius auth, and redirect the internet trafic to a remote proxy.
anyone can help.
thanks.
5 REPLIES 5

Hakim_HAMOUCHE
New Contributor II
I have :
- VX9000 in my datacenter.
- 5 sites (RF Domain) with multiple AP.
I want to set a WLAN with captive portal on these 5 sites:
how to create this : local VLAN or tunnel mode ?
who will act as DHCP for this WLAN...etc
who to redirect all trafic to my proxy

That should be Philippe Soirot

Regards,
Ondrej

Hi,

who should I contact in France ?
thanks.

Hakim,

as this is quite complex question I'd recommend you to contact one of our sales engineer trained in providing integrated solutions.
This will cover whole design plan and will provide better application of Captive portal features.

In short - you should keep the traffic locally bridged in guest VLAN (walled garden), then use i.e. post-authentication-vlan to distinguish between non-authenticated and authenticated clients. Authenticated vlan might be tunneled to your domain or anywhere you need. Non-authenticated will be soft-locked in walled garden.

DHCP is matter of design but this is not blocked by CaptivePortal so it might be external source.

Regards,
Ondrej

GTM-P2G8KFN