cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up new wireless, non-domain machines with AD credentials fail login.

Setting up new wireless, non-domain machines with AD credentials fail login.

Christopher_Dav
New Contributor II
On a newly created wireless (still in testing) non-domain machines cannot connect with AD credentials. Wireless is a new creature for me as well, where in the controller are logs specific to authentication to help me troubleshoot my issue.
4 REPLIES 4

Christopher_Dav
New Contributor II
Thanks! I see I was sending the log traffic to NetSight and had the detail level set to major.

Doug
Extreme Employee
Take a look at the following article:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-wireless-client-reporting-on...
Doug Hyde
Director, Technical Support / Extreme Networks

BrandonC
Extreme Employee
Hi Christopher,

I would make sure that the clients are not set to send the domain with login credentials. I've run into this in the past with non-domain machines, where they will send \.

I attempted to remedy this by setting up the profile manually and disabling this option. It works for iphones etc but not windows machines currently.
GTM-P2G8KFN