SFP (SX Media) not activating on

  • 0
  • 2
  • Problem
  • Updated 3 years ago
  • Solved
On a X460G2-48p-GE4 the SFP ports wont activate after I upgraded the firmware from to

If I downgrade to the port starts up again and the uplink connects to the core switch.

I checked the release notes and cannot find any info, on the logs it when I pull the sfp out and put it back in it just shows:

04/07/2015 14:42:14.33 : Media SX is inserted into Port 49

The SFP's were bought from Enterasys and used on C5 switches. The make on the SFP's are JDSU (JSP-12S0AA1) PN 52P6529
Photo of Tino


  • 656 Points 500 badge 2x thumb

Posted 4 years ago

  • 0
  • 2
Photo of Drew C.

Drew C., Community Manager

  • 40,858 Points 20k badge 2x thumb
Official Response
This issue is resolved in EXOS 15.7.2+ and EXOS 16.1+ releases.  Both are available from the support site.

For more information about the problem, please have a look at this article on GTAC Knowledge.
If you need help upgrading, refer to this article: How to Obtain and Upgrade EXOS