show aps in floormaps in nsight

  • 0
  • 1
  • Question
  • Updated 1 month ago
  • Answered

Hi.

I have a vx9000 + nsight installed. I have configured several rf-domains in the tree structure and added the plans. In the nsight I see the planes correctly in the maps view tab but the aps do not appear to be able to place them. I'm forgetting something?

Thanks

Photo of Jose Luis Vazquez

Jose Luis Vazquez

  • 1,034 Points 1k badge 2x thumb

Posted 4 months ago

  • 0
  • 1
Photo of Andy Holden

Andy Holden, Employee

  • 1,092 Points 1k badge 2x thumb

hi jose


did you define the APs on the floorplan on the controllers. This is a manual process

Photo of Jose Luis Vazquez

Jose Luis Vazquez

  • 1,034 Points 1k badge 2x thumb

I am in that step but the aps do not appear to be able to move them directly to the floorplan
Photo of Christopher Frazee

Christopher Frazee, Employee

  • 1,446 Points 1k badge 2x thumb
The APs are locked on the Controller under Dashboard/Network View. There is an unlock/lock ICON on the far right-hand side to unlock/lock APs. Once done, commit/save. Same will need to be done on NSight. 
Photo of Jose Luis Vazquez

Jose Luis Vazquez

  • 1,034 Points 1k badge 2x thumb
At the end i had to put the APs inside each rf-domain from the network view in the wing so that they would appear in the nsight and be able to drag them to their location.
Thanks Chistopher and thanks Andy.
Regards
Photo of Dan Traian Popescu

Dan Traian Popescu

  • 70 Points
hi,

i have a similar situation. On the same Rf domain only some APs doesn't show up to be able to drag them to the map.

Regards,
Photo of Dan Traian Popescu

Dan Traian Popescu

  • 70 Points
do you have any suggestions?
Thank you!