cancel
Showing results for 
Search instead for 
Did you mean: 

Show IP address of specific port

Show IP address of specific port

Visconti
New Contributor III
I have finally use netsight console v8 after using GUI web version.
Can I create a flexview that can show me the IP address of all port of my switch (series B5 e x450) ??
I see a lot of parameter in manage flexview session of netsight console

12 REPLIES 12

Visconti
New Contributor III
good for you..... when I try to download nedi 1.4 I receive the message "link not found"

Visconti
New Contributor III
if I cannot download 1.4 I cannot install 1.6ver

Hrm ... it's working for me? Try this direct link: https://www.nedi.ch/pub/nedi-1.6C.tgz

EDIT: Sorry, I see you were trying to download the 1.4 ISO. Can't help there. Looks like the link is indeed broken.

Steve_Ballantyn
Contributor
I use Extreme Management Center (Netsight) but I also still use my old NeDI server. NeDI does a very nice job of mapping your switches on a schedule, and then puts it all in a database. So at any given time I can pull up one of my switches and display MAC's, IP's, hostnames, etc. for *everything* on my network.

It's by no means easy to setup, but once you have things running it's very easy to use.

It's also free! You can check it out here: https://www.nedi.ch/
GTM-P2G8KFN