show vlan statistics not show the tx total and tx Byte X440-48p

  • 0
  • 2
  • Problem
  • Updated 1 year ago
  • Not a Problem
the show vlan statistics is not showing the TX frames or Bytes 
have a X440-48p 
Vlan                Rx Total        Rx Byte         Tx Total          Tx Byte
                     Frames          Count           Frames            Count
================================================================================
Default           313831111    183112494472               -                - 
voice                125149        10530642               -                - 
Photo of Jarret Murray

Jarret Murray

  • 90 Points 75 badge 2x thumb

Posted 1 year ago

  • 0
  • 2
Photo of Andrew Imam

Andrew Imam, Alum

  • 1,026 Points 1k badge 2x thumb
Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew
(Edited)
Photo of Jarret Murray

Jarret Murray

  • 90 Points 75 badge 2x thumb
Ya did try the config port all monitor vlan "voice" tx-only
no joy, O well thanks for the speedy reply
Photo of Bin

Bin, Employee

  • 5,374 Points 5k badge 2x thumb
Hi, This article may help you. 

Show vlan statistics don't show Tx counters
https://gtacknowledge.extremenetworks.com/articles/Q_A/Show-vlan-statistics-don-t-show-Tx-counters

Best regards