cancel
Showing results for 
Search instead for 
Did you mean: 

show vlan statistics not show the tx total and tx Byte X440-48p

show vlan statistics not show the tx total and tx Byte X440-48p

Jarret_Murray
New Contributor
the show vlan statistics is not showing the TX frames or Bytes
have a X440-48p
Vlan Rx Total Rx Byte Tx Total Tx Byte
Frames Count Frames Count
================================================================================
Default 313831111 183112494472 - -
voice 125149 10530642 - -

3 REPLIES 3

Bin
Extreme Employee
Hi, This article may help you.

Show vlan statistics don't show Tx counters
https://gtacknowledge.extremenetworks.com/articles/Q_A/Show-vlan-statistics-don-t-show-Tx-counters

Best regards

Jarret_Murray
New Contributor
Ya did try the config port all monitor vlan "voice" tx-only
no joy, O well thanks for the speedy reply

Andrew_Imam
Extreme Employee
Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew
GTM-P2G8KFN