cancel
Showing results for 
Search instead for 
Did you mean: 

Slot-1: RADIUS queue is full, check RADIUS configuration and/ or check RADIUS server.

Slot-1: RADIUS queue is full, check RADIUS configuration and/ or check RADIUS server.

holden
New Contributor
Hi,

we have a recurrent problem that the Netlogin Ports were disconnect.

Slot-1: RADIUS queue is full, check RADIUS configuration and/ or check RADIUS server.


How can i troubleshoot it?

Thanks & Regards

4 REPLIES 4

Bin
Extreme Employee
Hello Holden,

Thank you for sharing the information.

Best regards,
Bin

holden
New Contributor
Hi,

the issue is gone since on the core switches the module connected on the uplink restarted due to a memory leak.

Thanks for your help.

Bin
Extreme Employee
Hello holden,

This message shows that
- The RADIUS request queue has reached its maximum limit. AAA will not send any more requests to any RADIUS server until the queue goes below its maximum limit.

"show radius" from switch will help you to check the radius statics on the switch.

Also verify that the radius configuration is correct, and ensure that configured on radius servers are operational and reachable.

Best regards,
Bin

davidj_cogliane
Contributor
Switch type and code version are almost always relevant to an issue.

What type of switches are in this stack?
What version of code are you running?
If this is an xos stack, what is the output of:
show config aaa detail

Thanks,
GTM-P2G8KFN