Slot-2: Unable to Add L2 2:4 to s,G,v=ac12090c,e0000005,510 IPMC 13, unit 0 Entry not found

  • 0
  • 2
  • Problem
  • Updated 4 years ago
Finding subjected error in BD-8806/15.3.3.5 p1-4.
Can someone help me understanding and resolving these error messages, its flooding log message space too.
Photo of Hardik

Hardik

  • 100 Points 100 badge 2x thumb

Posted 4 years ago

  • 0
  • 2
Photo of Jason

Jason, Employee

  • 294 Points 250 badge 2x thumb
You should reach out to the Gtac and open a ticket
Photo of Hardik

Hardik

  • 100 Points 100 badge 2x thumb
Thanks Jason !
Do you think these messages could be service impacting ?

BR//
Hardik
Photo of Jason Parker

Jason Parker, Employee

  • 2,918 Points 2k badge 2x thumb
I am searching the database since I have been here today and will get back to you
Photo of Jason Parker

Jason Parker, Employee

  • 2,918 Points 2k badge 2x thumb
Could you send in a configuration or even the full log?
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
This log messages appear when there is mismatch between the h/w and s/w entries. When certain traffic comes to switch and if H/W entry is not present then that traffic would be process by CPU.
Photo of Hardik

Hardik

  • 100 Points 100 badge 2x thumb
Hi Sumit,
Thanks for your reply, I know "debug hal..." command will get hardware entry. what is the way to find s/w entries ?


BR//
Hardik
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
 "debug hal..." will not show the h/w entries.
You need to contact GTAC to report this issue.
Photo of Jason Parker

Jason Parker, Employee

  • 2,918 Points 2k badge 2x thumb
debug hal show fdb may help
Photo of Jason Parker

Jason Parker, Employee

  • 2,918 Points 2k badge 2x thumb
Please contact the GTAC as Tokle has stated so we can get to the bottom of the issue.
Photo of Thiago Ferreira

Thiago Ferreira

  • 60 Points
Hello guys, i'm having the same problem in network, where i work.

Anybody have a solution for the problem?
Photo of Drew C.

Drew C., Community Manager

  • 37,350 Points 20k badge 2x thumb
Hi Thiago,
There are a few causes for this particular problem.  As suggested above, I would recommend opening a case with GTAC so they can help point you in the right direction.  The most likely recommendation will be a software upgrade.

You can open a case online, or via phone:  http://www.extremenetworks.com/support

-Drew