slow SNMP polling SSA-T1068

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I am new to SNMP polling, and gathering information in this manner. I am trying to get a SolarWinds SNMPwalk.exe utility to work against my SSA-T1068 switch.  I am able to get information, but it seems very slow to respond.  I thought that if I point to the host IP of the management port of the SSA, and I put in "1" for the starting point of the OID, it would come back in 10-20 seconds.  It seems to take a minute or 2.  Is that normal?  I'm trying to work with another group that does the SNMP management, and they are questioning if the switch is working right.    Any thoughts on this?
Sony
Photo of Sony Francis

Sony Francis

  • 110 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Bastian Sprotte

Bastian Sprotte, Employee

  • 1,610 Points 1k badge 2x thumb
Hello,

in S-Series we use an MIB function called Time-Filter MIB. Often MIB-tools not correctly support that function. so we added an command on the S-Series to help these tools.

try this command:

set snmp timefilter break enable

this should cover the Time-filter function for the SNMPwalk you do.

-
Photo of Sony Francis

Sony Francis

  • 110 Points 100 badge 2x thumb
I should have mentioned that in my original post.  I did set that parameter, as I saw that comment.  It did not seem to make anything faster.  That is a global change on the switch.
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,498 Points 5k badge 2x thumb
you might look at the CLI of the S-Series and check the 'show system utilization'
If other tasks are very high, SNMP will be serviced low in priority.
Also, if SNMP as a task is very high, it may account for performance as well. 
Both situations are rare, but should be investigated to weed out performance issues on the network.
Photo of Bastian Sprotte

Bastian Sprotte, Employee

  • 1,610 Points 1k badge 2x thumb
If you run an MIBwalk from OID 1 you will make an getNext for like 60.000 or more OIDs, this is normal that these will take time. not sure why you make that walk.
Photo of Sony Francis

Sony Francis

  • 110 Points 100 badge 2x thumb
So when I put in the hostname for the SSA, and the root OID or 1, here is what I'm getting back:   .1.0.8802.1.1.1.1.1.2.1.2.12019 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12020 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12021 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12022 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12023 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12024 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12025 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12026 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12027 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12028 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12029 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12030 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12031 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12032 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12033 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12034 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12035 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12036 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12037 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12038 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12039 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12040 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12041 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12042 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12043 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12044 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12045 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12046 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12047 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.12048 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.13001 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.13002 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.13003 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.13004 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005001 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005002 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005003 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005004 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005005 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005006 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005007 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005008 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005009 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005010 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005011 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005012 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005013 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005014 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005015 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005016 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005017 = GAUGE32: 1
.1.0.8802.1.1.1.1.1.2.1.2.1005018 = GAUGE32: 1
It comes back within what I assume is the timeout period.  I'm trying to tell if it is getting everything that it should.  It is returning 89 results.  I did check the utlization comment made above.  It is 90+ % idle, so it doesn't seem very busy.  Thanks for the assistance.