SNMP privacy AES in XOS 15.3.1.4

  • 1
  • 1
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)
Could you please somebody tell me whether XOS version 15.3.1.4 supports for SNMP privacy AES?
Photo of Weda

Weda

  • 994 Points 500 badge 2x thumb

Posted 2 years ago

  • 1
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,894 Points 20k badge 2x thumb
I can't find a 15.3 command guide but you could just try it on the CLI - if the command is available it should work.

From KB....
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-get-XOS-SNMPv3-settings-to-work-wit...

# configure snmpv3 add user snmpuser authentication md5 snmpauthcred privacy ?
Photo of Kawawa

Kawawa, GTAC

  • 3,292 Points 3k badge 2x thumb
Support for 3DES and AES was added in ExtremeXOS 12.3.  You can find this information under the configure snmpv3 add user command description in the Command reference guide: http://documentation.extremenetworks.com/exos_commands/EXOS_21_1/Preface/c_introduction.shtml
Photo of Weda

Weda

  • 994 Points 500 badge 2x thumb
Thanks
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Hello Weda

Yes it does. Here's the information from the user guide

Users are created by specifying a user name. Depending on whether the user will be using
authentication and/or privacy, you would also specify an authentication protocol ( RSA Data Security,
Inc. MD5 Message-Digest Algorithm or SHA) with password or key, and/or privacy (DES, 3DES, AES)password or key.
Before using the AES, 3DES users, you must install the SSH module and restart the snmpMaster
process. Refer to Installing a Modular Software Package on page 1629 for information on installing the SSH module.

P
Photo of Weda

Weda

  • 994 Points 500 badge 2x thumb
Thanks
Photo of Erik Auerswald

Erik Auerswald, Embassador

  • 13,458 Points 10k badge 2x thumb
Hi,

in EXOS version 15.3.5.2, AES is supported for SNMPv3 privacy (this is in use one my network). It should be available in your version of EXOS as well, the command reference says:
Support for 3DES and AES was added in ExtremeXOS 12.3.
Thanks,
Erik
Photo of Weda

Weda

  • 994 Points 500 badge 2x thumb
Thanks
Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
Three solid answers all posted within one minute of each other.  I like it!
Photo of Kawawa

Kawawa, GTAC

  • 3,292 Points 3k badge 2x thumb
#TeamExtreme, on a slow day!
Photo of Christina Brunk

Christina Brunk, Employee

  • 496 Points 250 badge 2x thumb
Here's the link to the Concepts Guide (http://extrcdn.extremenetworks.com/wp-content/uploads/2014/03/EXOSReference_bookmap.pdf). Older docs are moved to "Archive" so they are still readily available.