SNMP related faults.I wonder if there is a way to resolve this symptom.

  • 0
  • 1
  • Problem
  • Updated 1 year ago
  • Not a Problem
  • (Edited)

Model name: WM3700 (Ver.5.7.0.0-057R)
Symptom: SNMP response takes 10 seconds or more.

* If the SNMP data length is 80 or less, the response normally goes within 2 seconds
If the data length exceeds 260, the response takes more than 10 seconds.
What settings need to be set to allow fast speed response?

* Note: The firewall function is disabled.





Photo of jeon min

jeon min

  • 360 Points 250 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Drew C.

Drew C., Community Manager

  • 39,516 Points 20k badge 2x thumb
Hi Jeon, There doesn't appear to be any personal information in this post so I have removed the "private" flag so that others in the community can respond.
Photo of Tooley, Akiko

Tooley, Akiko, Employee

  • 610 Points 500 badge 2x thumb
Hello Jeon,

Please provide the output of  "service show process" from the controller and check process utilization.