SNMP Transceiver Information

  • 0
  • 1
  • Question
  • Updated 4 years ago
Hello Community,

I would like to know if there's possible to get an information output about transceiver DDM ports.

Like command below, I want to get those information, is there possible?


Port      Temp    TxPower  RxPower  TxBiasCurrent  Voltage-Aux1/ Voltage-Aux2       (Celsius)   (dBm)    (dBm)     (mA)         Vcc (Volts)       (Volts)
================================================================================
1         37.81     2.64    -8.02     35.96         3.28          N/A
Photo of Julian

Julian

  • 70 Points

Posted 4 years ago

  • 0
  • 1
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
Please check the chapter # 52 Supported Standards, Protocols,and MIBs from EXOS concept guide and see if it is mention there.

If not then it is not being supported by EXOS.