snmpassist

  • 0
  • 1
  • Problem
  • Updated 6 months ago
  • Not a Problem
exos version 22.3.1.4, snmp assist gives fault message at the end
Traceback (most recent call last):
  File "/usr/local/cfg/snmpassist.py", line 204, in <module>
    main()
  File "/usr/local/cfg/snmpassist.py", line 119, in main
    (snmpuser, authtype, authpw, privpw, privtype))
RuntimeError
Photo of Ignace Vyncke

Ignace Vyncke

  • 180 Points 100 badge 2x thumb

Posted 6 months ago

  • 0
  • 1
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,086 Points 10k badge 2x thumb
Looks like this is likely the same problem described in the issue on GitHub linked below:
https://github.com/extremenetworks/ExtremeScripting/issues/32

Can you get the following information:
  1. All commands/input used to trigger this.
  2. Are there any special characters in the auth or privacy passwords?
  3. What is the SNMP config on the switch prior to running the snmpassist.py script?