SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

  • 0
  • 1
  • Problem
  • Updated 12 months ago
  • Solved

Hi All.

I’m in a process of fisrt configuration of netsight. I wish to add XOS switch (X440-g2) to netsight by using script snmpassist. Unfortunately there is no connection over SNMP. There is connection through CLI from netsight to the switch. I was even able to add NMS and NAC by using default snmpv3 settings. I wish to use different profile for switches just to learn how to do that.

 

Here are screens from NMS:

 



AND the switch:


SWITCH

SNMP configuration has been deleted.

* X440G2-24t-10G4.40 # run script snmpassist

Would you like to (D)elete or (C)onfigure SNMPv3? c

Please enter your SNMPv3 User name: snmpuser

Please enter your SNMPv3 User password (8 to 49 char): snmpuserpassword

Please enter your SNMPv3 privacy password (8 to 49 char): snmpuserpassword

Please enter your authentication type (SHA/MD5): md5

Please enter your encryption type (3DES, AES, DES, HEX): des

 

SNMP Group name is used to link multiple SNMP users together. Its not something that Netsight/ExtremeControl asks for.

Please enter your SNMPv3 Group name: snmpusergroup

Please enter your SNMPv3 Access preferences: TEST

Would you like to disable SNMP v1v2c access? (y/n): y

Would you like to disable the default SNMPv3 user? (y/n): y

Would you like to disable the default SNMPv3 group? (y/n): y

SNMPv3 configuration has been completed

* X440G2-24t-10G4.40 # show snmpv3 counters

 

        snmpUnknownSecurityModels       : 0

        snmpInvalidMessages             : 0

        snmpUnknownPDUHandlers          : 0

        usmStatsUnsupportedSecLevels    : 0

        usmStatsNotInTimeWindows        : 0

        usmStatsUnknownUserNames        : 2

        usmStatsUnknownEngineIDs        : 40

        usmStatsWrongDigests            : 14

        usmStatsDecryptionErrors        : 0

SWITCH

PS. I wasn’t able to add that switch to the nms even by using standard commands.

 

Please advise.

 

Best Regards

Photo of Grzegorz Niemiec

Grzegorz Niemiec

  • 314 Points 250 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
Just setup SNMPv3 by hand.


configure snmpv3 add user SNMPUSERNAME authentication md5 PASSWORD privacy PASSWORD
configure snmpv3 add group GROUPNAME user SNMPUSERNAME sec-model usm
configure snmpv3 add access GROUPNAME sec-model usm sec-level priv read-view defaultAdminView write-view defaultAdminView notify-view defaultNotifyView
(Edited)
Photo of Grzegorz Niemiec

Grzegorz Niemiec

  • 314 Points 250 badge 2x thumb

Thank you Jeremy. It worked, the way you said. I will try anyway, to work it out with the script.

 

Best Regards