Software update results in two versions

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I did an update to a summit x440 using tftp. xos version 16.2.2.4
After successful update and reboot I get two different versions of software when I do show switch

Does this matter?

Many thanks
James

X440-24t.1 # show switch

SysName: X440-24t
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:04:96:9C:66:F8
System Type: X440-24t

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Thu Feb 16 15:58:17 2017
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Thu Feb 16 15:43:32 2017
Boot Count: 2
Next Reboot: None scheduled
System UpTime: 14 minutes 45 seconds

Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 15.5.3.4
Secondary ver: 16.2.2.4

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 15.5.3.4
150465 bytes saved on Thu Feb 16 15:42:50 2017
Photo of james delaney

james delaney

  • 70 Points

Posted 2 years ago

  • 0
  • 1
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,254 Points 10k badge 2x thumb
Hi James,

This is normal. The switch has two partitions that software can be installed to (called 'primary' and 'secondary'). This output indicates that the EXOS version loaded on 'primary' is 15.5.3.4, and the that the EXOS version loaded on 'secondary' is 16.2.2.4. It also indicates that the 'primary' partition is selected to be used and is currently booted.

-Brandon