Specify Snmp source interface for traps and logs

  • 0
  • 1
  • Question
  • Updated 3 weeks ago
  • Answered
Hi

we have a pair of  extreme BD8810 in which we use an inband for OAM vlan purposes. Some how after we did configure the snmp receivers the snmp traps are not getting to the NMS. I wonder if this is related to the fact that these are all being sent via the physical mgmnt interface which we are not using. If so, is there anyway to configure the sending of the traps via another interface (the inband one), which is the one used for ssh for example?

Thanks in advance.
BR
Gab
Photo of Gabriel Poza

Gabriel Poza

  • 334 Points 250 badge 2x thumb

Posted 3 weeks ago

  • 0
  • 1
Photo of EtherMAN

EtherMAN, Embassador

  • 6,306 Points 5k badge 2x thumb
You can define what ip  and vr to send traps from when you set up trap receiver 

configure snmp add trapreceiver x.x.x.x community (whatever) from x.x.x.x vr (vr where ip is) 
Photo of Gabriel Poza

Gabriel Poza

  • 334 Points 250 badge 2x thumb
Thanks a lot EtherMan, right to the point. will test this tomorrow.