Stacking Convergence Time

  • 0
  • 1
  • Problem
  • Updated 1 year ago
  • Not a Problem
  • (Edited)
One of my customer established connectivity of one edge switch (X440) through two uplinks with two core switches (X460) stacked together. If any one uplink goes down, traffic shift to other uplink takes around 57 sec for them which is too much. They created LAG as well but problem remains same.
Photo of Waqas Naeem

Waqas Naeem

  • 896 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Ron Huygens

Ron Huygens, Employee

  • 2,928 Points 2k badge 2x thumb
If you use a LAG between the single X440 and the stacked X460, there should be no interruption when one of the LAG links goes down.

Is this pure L2 traffic?
Is there any other L3 or L2 protocol involved?
Photo of Waqas Naeem

Waqas Naeem

  • 896 Points 500 badge 2x thumb
Network is for CCTV, so there is no L3 traffic. Let me try to get the configuration file