cancel
Showing results for 
Search instead for 
Did you mean: 

Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

Status Monitoring of Windows 2016 from XMC via SNMP - Firewall problem

Grzegorz_Niemi1
New Contributor II
Hello,

Did someone have a problem with status monitoring of Windows Server from XMC via SNMP?

Problem occur with windows firewall on. Although I have enabled inbound and outbound rules for SNMP Service and SNMP Trap with firewall turned on there is no connection over SNMP.

When I turn firewall off there is connection.

Which rule I should enable to have connection over SNMP?

(last screen shows fine connection over SNMP but with firewall turned off)

9d449152d0d24e2695a13e960ab003ce_RackMultipart20180810-106395-1dodo2-Plik_4_Working_Firewall_off_inline.png


4 REPLIES 4

tknv
Extreme Employee
Hi Grzegorz, I guess maybe accessible IP scope isn't set. Did you set accessible IP scope for SNMP service?

Thank you  it helped. I didn’t see that SNMP rule accept (by default) connections only from "local network"

Grzegorz_Niemi1
New Contributor II
"SNMP service" opens 161 and 162, as below:
Inbound:

82b4788a614c44f3ab48d5581bf10b4b_RackMultipart20180810-83545-n13y8i-plik_5_inline.png


outbound:

82b4788a614c44f3ab48d5581bf10b4b_RackMultipart20180810-50521-jjx0cc-plik_5_outbound_inline.png


Karthik_Mohando
Extreme Employee
Hi Grzegorz,

UDP ports 161, 162 has to be allowed, is that what those options "SNMP service" does?

GTM-P2G8KFN