STP topology and configuration steps

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
I am new to this xtereme switch so am in a situation to configure stp. I have to setup STP in two X650-24x(SSns), so if anyone share me a topology to setup STP and configuration steps it will be a great helpful.
Photo of Dinesh Kumar

Dinesh Kumar

  • 130 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,086 Points 10k badge 2x thumb
Hi Dinesh,

This GTAC Knowledge article may be helpful:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS

-Brandon
(Edited)
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,484 Points 10k badge 2x thumb
Hi Dinesh,

As mentioned in the other post we need something a little more specific to help you. Do you have a network already setup? are you starting from scratch? Did the resources I linked in the other post help?
Photo of Dinesh Kumar

Dinesh Kumar

  • 130 Points 100 badge 2x thumb

Hi Voss,

I am starting from the scratch, I am doing a lab setup configuring rstp in two switch. So I need the step by step configuration for the two switch with a simple topology diagram.

Photo of Dinesh Kumar

Dinesh Kumar

  • 130 Points 100 badge 2x thumb


    |------------|port4    port4 |-----------|
    | switch1 |------------------| switch2|
    |              |------------------|             |
    |------------|port5    port5 |-----------|  


Configuration for this setup


Photo of Patrick Voss

Patrick Voss, Employee

  • 11,484 Points 10k badge 2x thumb
Hi Dinesh,

Based on this information the article Brandon and I linked has everything you need. You will just need to fill in the VLAN and port information into the commands.
Photo of Dinesh Kumar

Dinesh Kumar

  • 130 Points 100 badge 2x thumb
OK Voss. Thanks.