cancel
Showing results for 
Search instead for 
Did you mean: 

STP topology and configuration steps

STP topology and configuration steps

Dinesh_Kumar
New Contributor
I am new to this xtereme switch so am in a situation to configure stp. I have to setup STP in two X650-24x(SSns), so if anyone share me a topology to setup STP and configuration steps it will be a great helpful.
6 REPLIES 6

Dinesh_Kumar
New Contributor
OK Voss. Thanks.

Patrick_Voss
Extreme Employee
Hi Dinesh,

Based on this information the article Brandon and I linked has everything you need. You will just need to fill in the VLAN and port information into the commands.

Dinesh_Kumar
New Contributor

|------------|port4 port4 |-----------|
| switch1 |------------------| switch2|
| |------------------| |
|------------|port5 port5 |-----------|

Configuration for this setup

Dinesh_Kumar
New Contributor
Hi Voss,

I am starting from the scratch, I am doing a lab setup configuring rstp in two switch. So I need the step by step configuration for the two switch with a simple topology diagram.

GTM-P2G8KFN