Summit stack dual master

  • 0
  • 1
  • Question
  • Updated 4 weeks ago
  • Answered
  • (Edited)
Hi expert,
My customer X460 stack have dual master several times, may I ask what kind of information I need to ask him to collect for this issue? Is the show tech enough?
Photo of Tim Smith

Tim Smith

  • 224 Points 100 badge 2x thumb

Posted 4 weeks ago

  • 0
  • 1
Photo of Tim Smith

Tim Smith

  • 224 Points 100 badge 2x thumb
 Currently it's working fine. Do I have to collect information from all individual slot?
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,268 Points 3k badge 2x thumb
Tim,

  1. What is the EXOS release running on the X460 stack?
  2. Provide the output of "show port stack-ports rxerrors" and "show port stack-ports txerrors"
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,268 Points 3k badge 2x thumb
Tim,

Adding to it, please check the following KB Articles - Dual mastership seen on a SummitStack

https://gtacknowledge.extremenetworks.com/articles/Solution/Stack-sync-issues

Photo of Sushruth Sathyamurthy

Sushruth Sathyamurthy, Employee

  • 752 Points 500 badge 2x thumb
#show stacking detail will also help. It will usually show up in newer versions' show techs. But in older versions, you will need to collect it.
Photo of Sarah Seidl

Sarah Seidl

  • 1,296 Points 1k badge 2x thumb
Are you using summit stacking or v.80 stacking.  We've had challenges too. We have 460 (g1) units and have replaced most summit stacking modules with the v.80 where we could.
In case you need it:
Show ver:
SS-B-#  = summit stack
SS-V80-B-# = V.80 stacking