cancel
Showing results for 
Search instead for 
Did you mean: 

Summit 24p SNMP OID for extremeEdpNeighborId vanished please help

Summit 24p SNMP OID for extremeEdpNeighborId vanished please help

Jon_Doe
New Contributor
OID for extremeEdpNeighborId has vanished from the ExtremeEdpEntry table

out put from snmpwalk..

snmpwalk -v2c -c public 172.16.98.4 1.3.6.1.4.1.1916.1.13.2.1.2
EXTREME-EDP-MIB::extremeEdpNeighborId = No Such Object available on this agent at this OID

I have checked on multiple switches that have been on line for varying numbers of days and are on totally different firmwares but they all behave this way so I am ruling out firmware and needing a reboot unless the vanishing happens moreless on or shortly after its booting up

any further advise would be very much appreciated
thanks

2 REPLIES 2

Alexandr_P
Valued Contributor
Hi, Jon!

First of all you have to look at ConceptGuide - is there ExtremeEdpEntry.
In EXOS_ConceptGuide for 15.4 there is only extremeEdpTable, extremeEdpNeighborTable and extremeEdpPortTable.
In MIB file there is a lot MIBs from ExtremeWare, so they didn't work in EXOS.

Thank you!

Dorian_Perry
Extreme Employee
Hi Jon,

Which application is being used to perform these SNMP walks?

Was there previously a response for this OID when polled in the same way previously?

Were there any changes to the SNMP App configuration or the Switch configuration?
GTM-P2G8KFN