cancel
Showing results for 
Search instead for 
Did you mean: 

summit x670-48 erps rings in differ ports

summit x670-48 erps rings in differ ports

Roman_Solovyov
New Contributor
Hello. the problem is that We cant make the second erps ringconfigure erps Ring-2 add control vlan v30
configure erps Ring-2 ring-port east 1:5
configure erps Ring-2 ring-port west 2:5
configure erps Ring-2 protection-port 2:5
enable erps Ring-2
configure erps Ring-2 add protected vlan v4
configure erps Ring-2 add protected vlan v31


this one is ok!
Now we are making the second ring - on other ports of summit x670

* Slot-1 Stack.3 # create erps Ring-1
* Slot-1 Stack.4 # configure erps Ring-1 add control vlan v20
* Slot-1 Stack.5 # configure erps Ring-1 ring-port east 1:25
Error: Current switch license level does not allow to configure the use of more than two ring ports

Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.6 # configure erps Ring-1 ring-port west 2:25
Error: Current switch license level does not allow to configure the use of more than two ring ports

Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.7 # configure erps Ring-1 protection-port 2:25
Error: Ring ports for "Ring-1" not configured
Error: Configuring Port 2:25 on ring Ring-1 failed
Configuration failed on backup Node, command execution aborted!

матерится на лицензию, вот

Here our license

Slot-1 Stack.4 # sh lic
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
Effective License Level:
Advanced Edge

из

in datasheet we can se that 32 erps rings can be done

Table 5: ExtremeXOS Advanced Edge License Features
ExtremeXOS Software Feature
Supported Platforms
EAPS Advanced Edge (multiple physical rings)
All platforms.
ERPS-more domains (allows 32 rings with matching ring ports)
All platforms.
and multi-ring support

16 REPLIES 16

Henrique
Extreme Employee
Yes you can. See an example below:

a8bdb2f221b546749cab60923296abcf_RackMultipart20160728-50946-1rkwx3t-ERPS-Multiple-Ring_inline.png



Roman_Solovyov
New Contributor
Does this config correct?
enable erps
create erps Ring-2
configure erps Ring-2 add control vlan v30
configure erps Ring-2 ring-port east 1:5
configure erps Ring-2 ring-port west 2:5
configure erps Ring-2 protection-port 2:5
enable erps Ring-2
configure erps Ring-2 add protected vlan v4
configure erps Ring-2 add protected vlan v31
configure erps Ring-2 add protected vlan v39

create erps Ring-1
configure erps Ring-1 add control vlan v30
configure erps Ring-1 ring-port east 1:6
configure erps Ring-1 ring-port west 2:6
configure erps Ring-1 protection-port 2:6
enable erps Ring-1
configure erps Ring-1 add protected vlan v40
configure erps Ring-1 add protected vlan v310
configure erps Ring-1 add protected vlan v390

Does this example config is correct?

Roman_Solovyov
New Contributor
By the way, can I use different ports to make several rings
for example
1,2 ports the first ring
3,4 ports the second ring
5,6 ports the third ring
and so on...

GTM-P2G8KFN