Support of COA (RFC 1576) on Summit 440 switch?

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Does anyone know if a summit 440/460  support Radius Change of Authorization (RFC 1576 or RFC 3576) they might be  the same. 

I could not find anything listed in the 16.1 XOS datasheet but thought I'd check.
  
Photo of Hofman, Jim

Hofman, Jim, Employee

  • 120 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,304 Points 10k badge 2x thumb
Hi Jim,

Based on some research, it does not look like EXOS supports this. If this functionality is needed, we would need to open up a feature request.

-Brandon
Photo of Luca Messori

Luca Messori

  • 210 Points 100 badge 2x thumb

I'm trying to configure CoA.

I have Netsight+NAC.

I have configured a captive portal for guests and I would change the vlan after authentication.

This is a screenshot of the traffic i have captured regarding CoA:

Im using a X440-24t-10G (firmware 15.7.2) and it isn't waiting packets on port 3799.

Could someone help me?

Have I configured the wrong port number?


Regards

(Edited)
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,304 Points 10k badge 2x thumb
Hi Luca,

EXOS does not support CoA, so this response from the switch is expected.

-Brandon