cancel
Showing results for 
Search instead for 
Did you mean: 

Switch Flash Corrupted

Switch Flash Corrupted

Waqas_Naeem
New Contributor II
My customer is trying to upgrade firmware of Summit X350-48t but facing some issue flash corruption. Please advise any fix for corrupted flash
4 REPLIES 4

Tripathy__Priya
Extreme Employee
It seems there are many articles already available over the web related to different error log messages noticed for the corrupted flash scenario. Hence until unless you specify those messages here it is very hard to point out the resolution for the same.

Anyway moving forward i will post the below article for your reference and check if they match your scenario or not:
https://gtacknowledge.extremenetworks.com/articles/Solution/Warn-DM-Warning-Error-11-writing-Node-Co...

Narayanan__Kart
Extreme Employee
Hi Waqas,

What the current status of the switch after trying upgrade?
Is it got stuck in booting state?

Can you enter bootrom in the beginning by holding down spacebar? If so, select the previous image on the switch and then boot.

BootRom > show image

Please let us know the current status?

Regards,
Karthikeyan

Roy_Noh
Extreme Employee

Narayanan__Kart
Extreme Employee
Hi Waqas,

Please let me know what's the version the customer is trying to upgrade?
Currently which version are they in?

Whats the error message they get during the upgrade?

Regards,
Karthikeyan
GTM-P2G8KFN