cancel
Showing results for 
Search instead for 
Did you mean: 

Switch X460G2 - eee set enable error

Switch X460G2 - eee set enable error

Admin_ZML
New Contributor II
tHi,

I have an problem with an X460-G2-48p switch witch gives the following erors on 8 ports. The ports where working fine until a few days ago, now they dont come up annymore.

2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=7, unit=0, enable=0, rv=-162015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=6, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=5, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=8, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=3, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=2, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=1, unit=0, enable=0, rv=-16
2015-06-24 17:21:54.73 Slot-2: bcm_custom_extr_eee_config_set(16711): eee set enable error, port=4, unit=0, enable=0, rv=-16
2015-06-24 17:21:37.22 Slot-1: PoE budget configuration is not allowed when dynamic budget is enabled
2015-06-24 17:21:37.22 Slot-2: PoE budget configuration is not allowed when dynamic budget is enabled
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:8, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:7, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:6, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:5, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:4, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:3, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:2, rv = -16
2015-06-24 17:21:30.72 Slot-1: Failed to set eee config on port 2:1, rv = -16

The switch is part of an stack with another X460-G2-48p. The other switch is still working fine. Even an diagnostics check didn't gave an answer.
I am running the 15.7.1.4 patch 2 on the stack. other than the first 8 ports of slot2 the stack is working normal
13 REPLIES 13

davidj_cogliane
Contributor
I see this message after rebooting a stack

could not clear eee stats Feature unavailable for slot 6: port 48

Is this error related to this discussion?

Thanks

I will be in district tonight and plan to test the functionality of the port. I will update you as to what I find.

Hi David,

I did a quick search internally, and I wasn't able to find anything that indicates that your error is related to the other EEE error.

If this error persists, or if you're seeing any other issues with that port, I'd suggest opening up a case with GTAC so we can take a closer look.

-Brandon

Bill_Stritzinge
Extreme Employee
Assuming you have powered or rebooted this node, I would suggest doing an RMA for the physical switch. In some research it looks like a hardware issue. Let me know the disposition. If you would like to proceed I can email outside of this forum and get that started. Let me know.

Bill
GTM-P2G8KFN