cancel
Showing results for 
Search instead for 
Did you mean: 

Syslog setup for X440 switches on Netsight.

Syslog setup for X440 switches on Netsight.

Joseph_Chacko
New Contributor
I an trying to setup the syslog option in NetSight(6.2.0.211). Whenever I right click the device and select the Syslog Receiver configuration, it says, the selected device is not supported. I have enabled the syslog optin in the switch. Please help
5 REPLIES 5

Tony_Thornton
Extreme Employee
Hi Joseph,
If you have not done so already, you may want to confirm IP connectivity between the x440 and the syslog server. Also, obtain a packet capture on the switch's egress port going towards the syslog server to see if the switch is actually sending the syslog information to the server when it is supposed to.

Regards
Tony

Hi TOny...How Can I do this?

Joseph_Chacko
New Contributor
Ronald, thanks for the update. I did try these options and I can see the exact outcome on the sh commands. But no logs are appearing in the Syslog server. I am using a KIwi free version for the time being. Anything else to check?

Ronald_Dvorak
Honored Contributor

e3b31da5b6a4408c8a32d668e828fc4d_RackMultipart20150922-15233-36pw1f-XOS_syslog_inline.png


GTM-P2G8KFN