Syslog : What does this mean? Whoe can translate this?

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
DRIVER[77876992]: hwutils.c(3749) 8943 %% soc_l2x_thread unit = 0: DMA failed too many times
Photo of Alexandra


  • 152 Points 100 badge 2x thumb
  • sad

Posted 4 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 19,854 Points 10k badge 2x thumb

In order for me to get this question sent off to the correct group for review, what product is reporting that message?


Doug Hyde
Sr Support Engineer
Enterasys Networks
Photo of Alexandra


  • 152 Points 100 badge 2x thumb
Hello Doug,
the message comes from an B5G124-48 with firmware ( BootProm 02.01.50 )


Photo of Alexandra


  • 152 Points 100 badge 2x thumb
And at the same time there were a lot of emergency Alerts from the same switch like

SIM[77876992]: broad_hpc_drv.c(2686) 8909 %% _soc_xgs3_mem_dma: L2_ENTRY.ipipe0 failed(NAK), unit 0

SIM[77876992]: broad_hpc_drv.c(2686) 8942 %% soc_l2x_thread: Too many errors

SIM[77876992]: hwutils.c(3959) 8902 %% Unit 0 DMA regs:PCIMEM_START(0x04ab9288) SBUS_START(0x06703000) ENTRY_CNT(0x00001000) CFG(0x0003000c) SBUS_ADDR(0x00000000) CMIC_SCHAN_CTRL(0x00000000) CMIC_DMA_STAT(0x00082012) CMIC_IRQ_STAT(0x60000100) rv(0xfffffff5) LINE(2986)

SIM[77876992]: hwutils.c(3975) 8904 %% MPC83xx DMA/PCI regs: DMAGSR(0x00000000) PCI_ESR(0x80000040) PCI_EATCR(0x3f10a001) PCI_EACR(0x00000000) PCI_EEACR(0x00000000) PCI_EDCR(0x00000000)

SIM[77876992]: hwutils.c(3989) 8905 %% PCI Status for Device 0x14e4:0xb514=0x02a0

SIM[147814784]: hwutils.c(2493) 8945 %% Error(0x6c327800)

LOG[1]: 262 %% EDB: Mgr Unit transition, Mgr is now Unit: 2.

From the X4 are some messages with spanning tree and portmanager
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 7,952 Points 5k badge 2x thumb

I suggest to upgrade to the latest firmware. If you see the same issue with latest firmware then I suggest to contact GTAC with show support and with current.log file.

good luck!