There is no method to authenticate the user

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Having a really weird issue over here with NAC and 802.1X.

I can see client requests coming in, I've set up a rule to allow access but for some reason I get the following;

There is no method to authenticate the user DBDF207C-5A08-4333-BAC8-8404E41AD076 discarding request.

I'm also seeing "NAC System Misconfigured" but can't for the life of me figure out why/where. 

Any pointers on where to start?
Photo of Tom Taylor

Tom Taylor

  • 804 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Yacobucci, Ryan

Yacobucci, Ryan, Multi-Tier Technical Support Engineer

  • 5,734 Points 5k badge 2x thumb
Official Response
To post the resolution: 

The error message "NAC system misconfigured" is due to an incomplete AAA configuration. The AAA configuration must be configured to in order to determine how authentications will be processed. If an 802.1x authentication is received by NAC Manager and there is not RADIUS server defined in a basic AAA configuration, or no specific configuration rule in the advanced AAA configuration this error message will be seen. 

See following KCS article: 

https://gtacknowledge.extremenetworks.com/articles/Solution/End-system-with-NAC-System-misconfigured-error-in-NAC-Manager/
(Edited)